usa: sales: 800-490-2361 technical support: technicalsupport@pomonatest.com fax: 425-446-5844 europe: 31-(0) 40 2675 150 international: 425-446-5500 where to buy: www.pomonaelectronics.com all dimensions are in inches. toleranc es (except noted): .xx = .02? (,51 mm), .xxx = .005? (,127 mm). all specific ations are to the latest revisions. specifications are subjec t to change without notice. registered trademarks are the property of their respective companies. copyright ? 2008 d2015569 rev. 001 page 1 of 1 model 6498 1000v cat ii passive oscilloscope probe model 6498 1000v cat ii passive oscilloscope probe accessories included with probe: features ? this probe is recommended for probing applications in service and development environments and is adjustable for low and high frequencies. ? the dc fine adjustment enables trimming for preferred voltage ranges. ? the probe's entire core is made of a high quality ceramic hybrid. ? pure coaxial design and laser trimmed resistors ensure highest signal fidelity along the signal path offering high bandwidth and fast risetimes for accurate impulse measurements. ? our passive probes are spring loaded, with needle sharp tips to support precise and safe measurements. ? probe tips are interchangeable and can be replaced easily. ? accessories (one of each) included with probe are: ? ground lead with alligator clip 22 cm (8.66?) ? insulating cap ? protection cap ? solid tip 0.8mm (0.0315?) ? spring tip 0.8mm (0.0315?) ? sprung hook ? trimmer tool specifications attenuation ratio 100:1 maximum input voltage cat ii1 1000 vrms scope bandwidth mhz 500 system bandwidth mhz (-3 db) 400 system risetime (ns) < 0.9 probe input resistance (m ? ) 50 probe input capacitance (pf) < 7.5 compensation range (pf) 10 ? 50 cable length 6.6 ft. (2 m) 1 rating : per iec 61010-031. maximum voltage allowed on the low or ground connection including shell and h ousing must not exceed 30 v. ordering information model: 6498
|
